Technical Articles
Helping broaden your knowledge
Liquid Applied Gutter Waterproofing versus Gutter Liners for Industrial Roof Gutters
Learn the benefits and drawbacks of each
Leaking valley gutters are a common problem on industrial roofs. When refurbishment is required, two of the most widely used solutions are liquid applied gutter waterproofing systems and gutter liners. Both can be effective, but each has advantages and limitations that should be considered before selecting the most appropriate solution.
Read MoreDo you know the difference between a Polyurethane coating and an MS Polymer coating?
The specification should fit the roof
The question isn't which technology is better. The question is: Which technology is right for this roof? The best specifications are driven by a detailed understanding of the roof asset, environmental conditions and the client's long-term objectives, not by habit or a copy-and-paste approach.
Read MorePreparing an Industrial Metal Roof for a PV Solar Panel Installation
Key Areas to Address Before Installation
Installing a photovoltaic (PV) solar system is a significant long-term investment, but before panels are fitted, it is essential to ensure the roof beneath them is in good condition.
Read MoreSurface Preparation of Rusted Metal Roof Sheets – Why ST2 Matters
The importance of surface preparation
When refurbishing a metal roof, surface preparation is the most important factor in achieving a long-lasting coating system. No matter how good the coating is, its performance depends on the condition of the substrate beneath it.
Read MoreWhy refurbish an aged metal roof?
Comparing refurbishment with replacement
If your metal roof is aged and exhibiting early stages of delamination or corrosion, you need to act.
But should you install new metal sheets? Or should you recoat the existing roof with today’s coatings technologies?
Read MoreHow to assess if an aged metal roof is suitable to recoat
How do I know if the original coating is suitable for application of a new coating?
This article is intended to help you determine whether a roof or wall sheet is suitable for application of a refurbishment coating to lengthen the life of the structure, rather than full roof replacement.
Read MoreTypes of Metal Roofing, and the Advantages & Disadvantages
A guide to the four most popular metal roofing materials
When it comes to selecting the right metal roofing for your commercial or industrial building, you are spoilt for choice. This article is intended to help you make a well-informed decision.
Read MoreHow can we help you?
Get in touch to discuss your roof refurbishment project.