Rooflock 48 - Metal Roof Coating System
Rooflock 48 for metal roofs is a solvent free coating system for refurbishing metal pitched roofs and cut edge corrosion. It is appreciated by specifiers for its superior aesthetics and by contractors for its single coat application.
For airless spray application.
Moisture tolerant.
A guaranteed coating system
With warranties of 15 and 25 years available, you have the assurance of a high performace and durable coating system. (For projects requiring a warranty, Rooflock must be consulted prior to commencement of the project).
Rust inhibiting
Contains rust inhibitors to arrest corrosion of aged steel roof sheets.
Superior aesthetics
The durable finish provides superior aesthetics and a neat smooth appearance
No catalyst required - saves time and labour.
There is no requirement for a seperate catalyst, saving time and labour cost.
Odourless
With the latest generation formulation, Rooflock 48 is solvent free and odourless
Environmental
Rooflock 48 coating does not contain solvents or isocyanates
Treat cut edge corrosion
Rooflock 48 can be applied to treat cut edge corrosion only (upto 15 years warranty) or as part of a full coating application.
Cella UK Property, Ipswich. 18,000sqm metal roof.
- Compatible with almost all metal roof substrates
- Sprayed directly from the tin - no thinners required
- Moisture tolerant
- Solvent free and odourless
- Single coat application
- Treats cut edge corrosion
- Steel*
- Zinc
- Coated steel
- Plastisol based coatings
* Must be prepared to Sa2.5
What is cut edge corrosion?
Cut Edge Corrosion is the term given to corrosion that develops at the factory guillotined tail ends of profiled steel roof sheets. As the bare steel at the sheet end begins to corrode, the original coating peels off and the corrosion moves progressively up the roof sheet.
Additionally, as the original mid-lap sealants break down, water can be driven in by capillary action and retained between the roof sheets, exacerbating the corrosion from within.
It is estimated that that around 2 in 3 of metal roofs in the UK are affected by cut edge corrosion, and if left unchecked, this issue can progress to become a serious problem affecting both the weatherproofing and structural
integrity of the roof. The roof can deteriorate to the extent that replacement is the only option.
However, by addressing cut edge corrosion early with application of a dedicated metal protection product such as Rooflock 48 Coating System, potentially costly and disruptive remedial action can be avoided.
Rooflock 48 Coating – reducing embodied carbon write-off
CAt 9.85t CO2e, steel has one of the highest values of embodied carbon in construction (even higher than concrete). When a steel roof is removed and replaced, this embodied carbon is written off and added directly to the organisation’s Scope 3 emissions reports.
By making a timely, sustainable choice and using Rooflock 48 Coating to either treat cut edge corrosion or as coating to the entire metal roof, the environmentally costly option of roof replacement can be avoided, and the roof is protected
for the future.
Metal Roofs
Arrest corrosion and weather-related degradation of metal roofs with today’s coating technologies
Read MoreFlat Roofs
Ensure your building remains watertight with long-lasting protection for years to come
Read More
Case Studies
Our latest projects where we have helped maximise commercial property investments
Read More