Profiled Filler Blocks

For sealing cavities between profiled sheeting and adjacent materials or substrates

Profiled Filler Blocks

Profiled Filler Blocks serve to seal cavities between profiled sheeting and adjacent materials or substrates, such as flashings.  They are manufactured to order, to your exact requirements, and are available in a wide range of combinations and variations.

Profile Options

When ordering please quote the manufacturer and the profile reference.

Flute Options

SF       Small Flute (or Eaves Fillers)
LF       Large Flute (or Ridge Fillers)
Pairs   Both Flute sizes

Material Options

Polyethylene Colours: Black, White or Black & White Combinations
High Density Polyethylene Colours: Black or White
(Recommended for rooflights)
EPDM Faced     Colour: Black
EPDM                 Colour: Black
Fire Resistant    Colour: Self Colour

Angle Cut Filler Blocks

Angle cut filler blocks are used where the sheet edge is at an angle.  Please provide the following information:
Roof Pitch angle in degrees
Angle on plan in degrees
Left hand or right hand (as viewed from ridge for hip fillers, and as viewed from ground for valley fillers).  If equal quantities of left handed and right handed are required, order the total linear metreage as “50% handed”.

Ventilated filler blocks

Ventilated filler blocks allow airflow to the roof space by means of Holes, V-Cuts (large flute) or Crown Cut (small flute).  Mesh Inserts to the Holes can be specified to deny access to inserts and vermin.

Self-adhesive filler blocks

Available with either Mastic or Adhesive tape, both factory applied, to aid with installation.

Extended wall heights

For composite panel applications an extended wall height may be required.

Double profiled filler blocks

These fillers are cut to match both the outer and inner sheet profile.

Block fillers

Any shape or block can be cut, including chamfer blocks and other shapes.