Fastflow Poly 1 LF Adhesive for Insulation and Membrane

For insulation boards and roofing membranes

Fastflow Poly 1 LF Adhesive for insulation and membrane

Fastflow Poly 1 LF Adhesive is an easy-to-use, single component polyurethane adhesive. It is a low foaming adhesive, so it rises to tolerate very minor undulations in the roof deck, and is suitable for attaching both insulation and flat roofing membranes.

Fastflow Poly 1 Adhesive requires no additional tooling on site and is very easy to use. Simply apply the adhesive to the substrate in straight lines at 300mm centres at a rate of 150 – 200g per square metre, dependent on the condition of the substrate, and place the boards into the wet adhesive after approximately 5 minutes. Where Fastflow Poly 1 LF Adhesive is used to adhere roofing membranes, we recommend that the membrane is rolled immediately after installation to ensure that the membrane remains flat to the substrate during cure.

Benefits

  • Universal adhesive for both insulation and membrane
  • Pressure-free container
  • No additional applicator tools required
  • Foaming adhesive
  • Cold applied

Suitable types of insulation boards

  • Polyisocyanurate
  • Polyurethane
  • Expanded polystyrene
  • Extruded polystyrene
  • Mineral fibre (contact Rooflock for advice)

Fastflow Poly 1 LF Adhesive coverage

Fastflow Poly 1 LF Adhesive is packaged in 6 kg tins, which are sufficient to cover an area of 30 – 40m2, dependent on the condition of the substrate.